SE-SM Series (ANSI pumps)
- SE-SM Series are our Metallic pumps(Semi Open Impeller), Horizontal, Back pull-out, Single Volute Casing type, Self Venting design, Single Stage, Centre line discharge, End Suction Centrifugal Pumps.
- Dimensional and design criteria of SE-SM Series pumps conform to ANSI B 73.1
- It comes in Jacketed / Non Jacketed Variant
Technical Specifications
Salient Features
Application
Technical Specifications
| Capacity | Up to 200 m3/hr |
| Head | Up to 100 meters |
| Temperature | Max. up to 250°C |
| Maximum Working Pressure | 16 bar |
| Pump Speed | 1440rpm , 2900 rpm |
| Max. Sp. Gravity | 1.2-2.0 |
| Viscosity (upto) | 200 mPas (cP) |
| Suction & Discharge | ANSI B16.5–Class#150 |
| MOC | Cast Iron (CI), Carbon Steel (CS) WCB Grade, Stainless Steel (SS 316 / 316 L) CF8M / CF3M , Stainless Steel (SS 304 / 304 L) CF8 / CF3, Hastelloy B & C , Ni- Hard Alloy Steels, CD4MCu |
Salient Features
- Back Pull Out Non Clog Design
- Available in Semi Open Impeller
- Available in Investment Castings for better surface finish
- Higher Efficiency
- Free from Casting Defect
- Low NPSH
- Single and Double Mechanical Seal
- Oil Lubricated Bearings
- Compact and Rigid Constructions.
- Quick Deliveries
Application
- Chemical Industries
- Caustic Soda Plants
- MEE Plant, Scrubber, Dryer etc
- Petrochemical Industries
- Solvent Transfer
- Pulp and Paper Industries
- Pharmaceutical Industries
- Textile Industries
- Cooling Towers Pumps
- Chilling Plant Pumps
- For Scrubbers, Filter Press, Ejector etc
- DM Water Plant
- Effluent Treatment Plant
SE-SM Series (ANSI pumps)
Product Overview
Technical Specifications
Salient Features
Application
Product Overview
- SE-SM Series are our Metallic pumps(Semi Open Impeller), Horizontal, Back pull-out, Single Volute Casing type, Self Venting design, Single Stage, Centre line discharge, End Suction Centrifugal Pumps.
- Dimensional and design criteria of SE-SM Series pumps conform to ANSI B 73.1
- It comes in Jacketed / Non Jacketed Variant
Technical Specifications
| Capacity | Up to 200 m3/hr |
| Head | Up to 100 meters |
| Temperature | Max. up to 250°C |
| Maximum Working Pressure | 16 bar |
| Pump Speed | 1440rpm , 2900 rpm |
| Max. Sp. Gravity | 1.2-2.0 |
| Viscosity (upto) | 200 mPas (cP) |
| Suction & Discharge | ANSI B16.5–Class#150 |
| MOC | Cast Iron (CI), Carbon Steel (CS) WCB Grade, Stainless Steel (SS 316 / 316 L) CF8M / CF3M , Stainless Steel (SS 304 / 304 L) CF8 / CF3, Hastelloy B & C , Ni- Hard Alloy Steels, CD4MCu |
Salient Features
- Back Pull Out Non Clog Design
- Available in Semi Open Impeller
- Available in Investment Castings for better surface finish
- Higher Efficiency
- Free from Casting Defect
- Low NPSH
- Single and Double Mechanical Seal
- Oil Lubricated Bearings
- Compact and Rigid Constructions.
- Quick Deliveries
Application
- Chemical Industries
- Caustic Soda Plants
- MEE Plant, Scrubber, Dryer etc
- Petrochemical Industries
- Solvent Transfer
- Pulp and Paper Industries
- Pharmaceutical Industries
- Textile Industries
- Cooling Towers Pumps
- Chilling Plant Pumps
- For Scrubbers, Filter Press, Ejector etc
- DM Water Plant
- Effluent Treatment Plant
